SkyRC e680 Multi-Chemistry Charger / Discharger This is an improved version of the previous e660 multicharger. SkyRC e680 is suitable for all current battery types: LiPo, Li-ion, LiFe, NiCd, NiMH, PB and also new generation LiHV with final voltage 4.35V per cell, with maximum 80W charging power and 8A charging current. Especially, it supports DJI Mavic battery with maximum 4A charging power. The E680 can work as a power supply with a maximum power of 80 watts so that it helps the hobbyists to power the DC equipment. DC power supply The SkyRC e680 charger is integrated with DC power supply, which output voltage is 13.8V with power from 10W to 80W. It is very convenient for drivers to operate their DC devices, such as tire heaters, pit lights, etc. Support for charging DJI Mavic battery The SkyRC e680 can charge the DJI Mavic battery with a maximum charging current of 4A. The Mavic charging cable (SK600023-06) is not included in the package. You have to buy it separately. AGM & Cold - Charging modes for Pb battery SkyRC e680 can charge AGM battery and can also be used to charge Pb battery at very low temperatures. Thermal cut-off The battery's internal chemical reaction will cause the battery's temperature to rise. When the temperature limit is reached, the process ends. This function is available by connecting an optional temperature sensor cable (SK600040), which is not included in the package. You have to buy it separately. Smart & efficient cooling system Temperature controlled 8000 rpm high speed bearing with cooling fan efficiently blows the air through the extruded aluminum flange and effectively cools the unit. Included: SKYRC e680 Charger Power cord XT60 plug charging cable DC cable with crocodile clip XH adapter