A solar collector that heats your water all year round and can be used both in homes, villas and summer cottages. The system is a green and smart alternative to electric heating, designed for those of you who think you can get by with a smaller hot water system. As solar collectors capture the sun's rays and convert these into energy that heats the water you use, you protect the environment and make money at the same time. The system only consists of a single unit, which makes it very easy to assemble as it is placed in a sunny place directly on the ground or up on your roof.

This is how it works

The solar collector's vacuum tube has a thin coating that captures the sun's rays. The vacuum tubes contain copper tubes with liquid that evaporates even at low temperatures. The steam moves the heat via the heat pipe and thus heats the water in the tank. The hot water tank is made of stainless steel. The insulation layer is made of polyurethane foam with high insulating capacity, which significantly improves the heat preservation effect and lifespan. Thus, the solar water heating system can work as usual in minus 40, which makes it useful high up in Sweden. The tank retains heat for up to 72 hours. The temperature can rise to 95 degrees.

The system works even with little solar radiation and, as previously written, can be used all year round even at temperatures as low as -40 degrees. During the cold winter months (November to February) or when the sun isn't shining enough, the built-in heating cartridge kicks in automatically so you still get enough hot water.

Constituents

The solar water heating system is in a single unit mainly consists of:
solar collectors,
storage water tank with built-in heating cartridge
expansion vessel
solar workstation that controls the four parts.

Preferences

Outer tank: Draw bench silver steel 0.4 mm

Inner tank: SUS304-2b 1.2mm

Water tank thermal blind pipe: 316 L stainless steel pipe

Number of heating pipes: 12

Condensing end of the heating pipe: 14 mm

Frost resistance ?50°C

Insulation layer: 141b Polyurethane

Frame: Galvanized steel 1.5 mm

Pressure range: 0.7 MPa

Pass the SOLAR key mark (EN12976) certificate

These accessories are included: TP valve, One-way valve, Magnesium rod, 1500 W electric heating cartridge, Heat conducting silicone and Negative pressure valve

Article number: 094844