The cable intended for assembly and connection between solar panels to the inverter and further to any regulator and junction box. This is a climate-resistant solar cell cable, adapted to demanding environments where the fine-wire construction makes the cable flexible and easy to handle and lay, and at the same time it is so durable that it is approved for permanent laying directly in water or in the ground. The cable is double-insulated and does not dry out in the sun, nor does it crack in winter cold. In addition to its excellent resistance to UV, it withstands a variety of oils and chemicals. The metal wires inside have also been tinned to resist corrosion.

Specification
4 mm black cable
Type: H1Z2Z2-K
Four: 1 x 4 mm2
Standard: TÜV tested and certified according to: EN 50618/IEC62930

Preferences
Material: Tinned copper
O.D/ (mm) 3.3 plus/minus 0.05
Insulation
Material: XLPO
Average thickness (mm) 0.7
Colour: Black

Electrical performance
Rated voltage: DC 1500V nominal
Operating voltage AC: 1000V – DC: 1500V
Test voltage AC: 6500V – DC: 15000V
Temperature range: -40 to 90 degrees
Max conductor temperature +120 degrees C
Spark test: AC-10KV/In air
Double insulated
Fine-wire tinned copper, Class 5
Sleek, flexible and easy to place and work with
Halogen-free
UV, ozone and weather resistant
Guaranteed lifespan in direct sunlight, at least 25 years
Approved for installation directly in the ground
Approved for permanent placement in water
Durable & abrasion resistant
Resistant to a variety of oils and chemicals
Conductor insulation in cross-linked halogen-free material, White
Outer sheath in cross-linked halogen-free material, Red
Temperature range: -40 – +90 degrees C
Min bending radius 4 x cable diameter
Outer diameter 4 mm2 = 5.4 mm,
Weight 5.8Kg/100M
Sold in a minimum of 10 meters and if you want longer, just change the number when you check out and we will not cut them into ten meter lengths

Article number 122324